Description
Power-Trim Co. manufactures 5 models of wheeled gasoline powered lawn edgers equipped with either Briggs & Stratton or Honda engines. Our edgers are built to last with high quality materials which is why they are the preferred choice of many commercial gardeners and groundskeepers in the U.S. and abroad.
Key Features
- General Construction: Edgers are all steel, using heavy gauge metals and tubing. Handles are arc welded to provide solid construction that resists fractures even under extreme operating conditions. All units have the handle braced to the engine to form a secure feel and reduce vibration. All hardware is nylock or whizlock type to guard against backing off during use. All controls are spring loaded positive locking. Manual disengagement clutch is standard on all models. With the use of such high quality materials, it's easy to see why Power-Trim edgers are "The Professional's Choice."
- Base Plate: A full steel base plate, stamped and formed, is the beginning of each and every Power-Trim edger. This full base plate, unlike bolted straps or bent tubing, cradles the engine and retards dirt and debris from reaching the engine area.
- Wheels: All Power-Trim edgers come equipped with 7" x 1.5" full steel wheels and solid rubber tires. All wheels have back-to- back hub industrial type ball bearings. Special neoprene seals are on all bearings to keep dirt and moisture out. Note: On models using the 8" x 2.75" front wheel the tire is a 100 lb. load series.
- Cutter Head Bearing: Power-Trim edgers employ an automotive water pump type cutter head bearing which is permanently sealed to resist dirt and moisture. The bearing assembly is pressed fit and recessed away from the blade to avoid seals being damaged from debris being caught between blade and bearing. The bearings have lifetime lubrication and never require any greasing.
- Blade: Edgers come fitted with a 10" x 2" x .08" thickness, heavy duty spring steel blade. Blades are installed on the bearing shaft between two sets of washers - one set of heat-treated hardened steel for strength and one set of fiber slip washers for added safety. Note: Use only genuine Power-Trim replacement blades. Although many after-market edger blades are available, Power-Trim cannot attest to the quality of any other blade but their own.
- Belt Tensioning Spring: All units employ a closely wound spring on the sidearm to generate the same belt tension in all operating positions. This feature increases belt life considerably.
- Blade Tilting Lever: The blade tilting lever consists of a three-piece 7 gauge cold rolled steel design and locks into tapered adjusting notches on the sidearm via a heavy duty torsion spring. Notches on the sidearm are "V" tapered to compensate for wear (lever is under constant tension pulling to bottom arc of "V") thus avoiding vibration as wear occurs.
- Dirt Deflector: The dirt deflector is made of heavy steel three-piece rigid construction and the flap is made of reinforced rubber and bolted to guard for maximum durability. Deflector travels with the sidearm in all operating positions to insure maximum safety for the user.
- Sidearm Main Pivot: Power-Trim's sidearm main pivot is affixed to the main frame using a heat-treated shoulder bolt which is spring-loaded to compensate for wear. This steel bolt is virtually impossible to bend assuring proper alignment even after years of service.
- Finish: All painted parts are powder coated with the finest baked urethane finish for maximum protection against weather deterioration.
Specifications
- All Power-Trim edger frame components are 100% interchangeable - engine type and front wheel configuration determine the model number.
- Manual clutch disengagement is standard on all models.
- 8" wheel models offer extreme versatility when edging curves and circles along with the capability to bevel cut 10 degrees left of vertical.
- All curb-riding units will edge while riding a 6" curb.
- Using "Trim Mode" means no more hand clipping grass around poles and trees or along fences and walls - just turn the blade flat and mow.
Model Specifications
- Model: 200-4
- Weight: 67 lb.
- Engine: B&S - 550 Series
- Front Wheel(s): 2 adjustable 7 in.x1.5 in.
- Rides Curb: Yes
- Trims: Yes
Frame Specifications
- Base: 11 gauge steel, stamped and formed
- Cutter Bearing: 1/2" arbor, permanently sealed water pump type
- Paint: Baked urethane powder coat finish
- Wheels: 7"x1.50" with steel hubs, solid rubber tires and ball bearings. Note - 8"x2.75" front wheels are 100 lb load tires
- Blade: 10"x2"x1/2" arbor, 0.80 thickness, heavy duty spring steel
- Side Arm Main: Pivot - spring loaded shoulder bolt
- Throttle: All steel mounting with screws to handle
Engine Specifications
- Manufacturer: Briggs & Stratton
- Model: 83132 Type 0224-F1
- Engine Type: 127cc, 5.50 Torque
- Starter: Recoil
- Muffler: Lo-Tone
- Fuel Capacity: 2.00 qt.
CALIFORNIA PROPOSITION
⚠ 65 WARNING ⚠
WARNING: This product contains chemicals know to the state of California to cause cancer and birth decects or other reproductive harm.
ADVERTENCIA: Este producto contiene productos quimicos reconocideos por el estado de California que provocan cancer, defectos de nacimiento u otros danos reproductivos.
For more information: www.p65warnings.ca.gov